Condensation Problems

Are You Fed Up With Your Condensation Problems?

Condensation problems are often a huge concern for homeowners in specific areas of the country.  Water vapor that is offered from the ground combined with high humidity in the air are the culprits that give birth to all of those water beads that you see on your windows. For most people, the solution is to simply replace their old windows with new replacement windows.  However, this can also happen to newer windows.  So, why do the new windows that you just had installed look as bad as the old ones?

You probably never could have dreamed that you could have condensation problems on the presents that you just purchased for your home but it really does happen and it's actually quite common.  The best way to control these problems is to purchase high quality windows and control your home's humidity.

Why You?

The area where your home resides could be the cause for your condensation problems.  There are actually places in the United States that have no concerns about condensation whatsoever.  People that live in southwest areas have high temperatures and low humidity and have probably never seen a water drop on their window.  Therefore, if you live anywhere else that sees high humidity, regardless of temperature, your windows may look like they want through a car wash from time to time.

Things That Cause Indoor Humidity

There are a multitude of factors inside your home that could be causing those condensation problems that you are plagued with.  The steam from showers, hot tubs, whirlpools, washing machines and dishwashers are all causes of humidity as are cooking and plants.

You may also not realize that water vapor can be produced from the soil that is around the foundation of your home's walls and also underneath the floor of your basement.

If you have an older home, you may have an even harder time controlling vapor because older houses often have slabs or rock foundations that they were built on that offers no protection from moisture.  A musty basement is a common characteristic of these types of homes.

Condensation problems can be controlled when new houses are built by having vapor barriers installed within the damp part of the concrete.  Hot asphalt spray is a popular simple vapor barrier but synthetic rubber foundation and rubber modified asphalt are both ideal products that double as a waterproofing product and vapor barrier.  Newer homes can even have these barriers installed right over crawl spaces.

Monitor humidity

As the temperature outside decreases, the temperature inside need to increase which really does nothing to prevent condensation problems.  A good way to measure the humidity in your home is by using a hand held hygrometer.  If you decide that you want to monitor the humidity within your home you should do so everyday.  Readings should be taken in the same location and at the same time everyday to really get true results.  You will also want to log the temperatures outside as well along with the humidity inside.  This will help pinpoint the exact cause of your condensation problems.

If you are monitoring the humidity in your home, you may find a dehumidifier handy.  Once you know that you are at a level that is going to start causing condensation to appear, the dehumidifier can be ran as a preventative measure.

Replacement Windows

If you have condensation problems, purchasing replacement windows of the highest quality may be your only option.  When choosing a company, read reviews and ask for referrals.  Independent testing as well as certification is always helpful to look for as well.  There are third party laboratories that develop very strict guidelines in regards to manufacturing to ensure that you are getting a high quality window that will reduce condensation problems.